Shark – Wrap for 33 Round Magazine for Glocks

Description

Shark Wrap for Glock 33-Round Magazine — Premium Vinyl Decal

Give your extended Glock magazine some teeth with our Shark Wrap for 33-round Glock magazines — a full-color, precision-die-cut vinyl decal featuring the iconic P-40 Warhawk shark-mouth design. It’s cut to fit the extended 33-round 9mm “stick” magazine used across the Glock 19, 17, 34, and AR-9 platforms, so it lines up clean with no trimming or guesswork.

Application is simple peel-and-stick: clean the magazine body, line up the edges, peel the backing, smooth it on, and set it with a little heat. No tools, no gunsmithing, no permanent modification.

Most importantly, this is an ultra-thin premium matte vinyl — not a bulky plastic sleeve. The low-profile material adds a sharp custom look without adding mechanical bulk, so your magazine still seats fully in the mag well and drops free cleanly under gravity, exactly like it did from the factory. You get a vibrant, durable, head-turning upgrade with zero impact on function.

Why Choose Our Premium Vinyl Mag Wraps

• Ultra-thin, low-profile material — thin enough to preserve drop-free reliability; the magazine seats fully and falls free with no added friction or bulk.
• UV-resistant inks — full-color graphics won’t fade or yellow from sun exposure, sweat, or handling.
• Surface scratch protection — shields the magazine body from the scuffs and scratches of normal range use and storage.
• Clean, residue-free removability — peels off cleanly when you want a change, with no sticky adhesive residue left on the polymer.
• Precision die-cut fit — cut specifically for the 33-round Glock magazine body, so edges line up without trimming.
• Heat-resistant matte finish — a non-glare matte surface that tolerates heat and handling.
• Reversible personalization — change your look anytime without permanently altering the magazine.

Vinyl Wrap vs. Permanent Spray Paint / Cerakote

Factor	My Southern Tactical Vinyl Wrap	Spray Paint / Cerakote
Cost	Low, per-magazine	Higher (materials, curing, or pro service)
Application effort	Minutes — peel and stick	Hours — disassembly, masking, curing
Reversibility	Fully reversible; swap designs anytime	Permanent — must strip/refinish to change
Graphic detail level	Full-color, photo-quality printed detail	Limited to solid colors / stencils
Impact on frame tolerances (drop-free fit)	Ultra-thin — preserves drop-free fit	Can add build-up affecting fit if over-applied
Skill required	None	Moderate to high

Frequently Asked Questions

Will this wrap cause my Glock magazine to stick inside the mag well?

No. The wrap uses ultra-thin matte vinyl with a very low profile, so it doesn’t add meaningful thickness. Your magazine seats smoothly and drops free under gravity just like an unwrapped factory mag — no binding or friction.

Does this wrap fit aftermarket 33-round magazines like ETS, KCI, or Magpul?

It’s precision-cut for factory OEM Glock 33-round 9mm magazine dimensions. Aftermarket mags (ETS, KCI, Magpul) can vary slightly in size and shape, so a perfect fit isn’t guaranteed — check your magazine against OEM dimensions before ordering.

How hard is it to apply a vinyl wrap to a Glock stick mag?

It’s easy. Clean the magazine surface with isopropyl alcohol, line up the edges, peel the backing, and stick it on. Apply light heat from a hairdryer to help it conform and seal. No tools or gunsmithing needed.

Is this wrap printed or laser engraved?

Printed. It’s a high-resolution, full-color direct-printed vinyl wrap — not laser engraving. That gives you vibrant, detailed, multi-color graphics like the shark-mouth design that engraving can’t reproduce.

Can I remove the wrap if I want to change the design later?

Yes. The wrap peels off cleanly without leaving sticky residue or damaging the base polymer, so you can swap to a new design or return the magazine to plain whenever you like.