The AR-10 world isn’t plug-and-play like the AR-15 — DPMS, ArmaLite, and SR-25 patterns all run different dimensions, and the wrong part means a build that won’t close. My Southern Tactical cuts through that confusion. We make durable, AR-10 custom parts sized for the patterns that actually dominate the market — from custom printed magazines to .308 dust covers — so your LR-308 build comes together right the first time. Use the platform compatibility matrix below to match components to your exact receiver, then run them hard: every part is built for real tactical reliability, not just looks. Personalize your big-bore rig without gambling on fitment.
The AR-10/.308 market isn’t standardized — always confirm against your specific receiver before buying.
| Receiver Pattern | Upper Tang Height | Compatible Magazine | Take-Down Pin Pattern | Common Brand Examples |
|---|---|---|---|---|
| DPMS LR-308 — High Profile (Gen 1) | ~3/16″ (0.210″); taller top rail | Magpul LR/SR-25 (DPMS/SR-25) PMAG | DPMS/LR-308 pins (~0.2765″ dia) | Early DPMS Panther LR-308, Bushmaster .308 |
| DPMS LR-308 — Low Profile (Gen 2) | ~1/8″ (0.150″); parts-compatible with High | Magpul LR/SR-25 (DPMS/SR-25) PMAG | DPMS/LR-308 pins (~0.2765″ dia) | Aero Precision M5, PSA PA-10 (Gen 2) |
| ArmaLite AR-10 — A-Series (AR-10A) | ArmaLite-pattern profile | Accepts Magpul LR-308 (SR-25-pattern) PMAGs | ArmaLite-proprietary — NOT DPMS-compatible | ArmaLite AR-10A (Def10, Tactical) |
| ArmaLite AR-10 — B-Series (AR-10B) | ArmaLite-pattern profile (retro) | ArmaLite M14-derived “waffle” mags — NOT SR-25/DPMS | ArmaLite-proprietary — NOT DPMS-compatible | ArmaLite AR-10B (retro-pattern) |
| Knight’s Armament SR-25 | KAC-pattern profile | SR-25 pattern (Magpul LR/SR-25 PMAG) | KAC SR-25 proprietary spec | KAC SR-25; LMT MWS, SIG 716i |
Bottom line: DPMS-pattern (High + Low) and SR-25-pattern rifles share the Magpul LR/SR-25 magazine and are the closest thing to an industry standard. ArmaLite-pattern receivers and the Rock River LAR-8 are separate ecosystems — pins, mags, and barrel extensions do not cross over.
No. AR-10/LR-308 uppers use a larger, longer ejection port than AR-15s, so an AR-15 dust cover is too small to span or seal it and the hinge-pin/spring spacing won’t line up. You need a dedicated .308/AR-10 cover. Ours are cut for the DPMS LR-308 pattern (High and Low profile), which share identical ejection-port dimensions.
They’re parts-compatible — the only real difference is top-rail height. A high-profile upper’s tang above the charging handle measures ~3/16″ (0.210″); a low-profile measures ~1/8″ (0.150″) — about a 1/16″ lower rail. That affects optic height and some monolithic handguards, but the ejection port, bolt, barrel extension, and dust cover are identical, so our DPMS-pattern covers fit both.
It depends on the model. Modern ArmaLite AR-10A rifles accept Magpul LR/SR-25 PMAGs (ArmaLite ships them today), but the retro ArmaLite AR-10B uses proprietary M14-based “waffle” magazines that SR-25/DPMS PMAGs won’t fit. Rock River Arms’ LAR-8 runs its own magazine pattern, so standard SR-25/DPMS PMAGs are not compatible. Confirm your exact model.
Start with the magazine and the maker. If it runs Magpul LR/SR-25 PMAGs, it’s almost certainly DPMS LR-308 or SR-25 pattern (Aero M5, DPMS, PSA PA-10, SIG, LMT). To tell DPMS High from Low, measure the tang above the charging handle: ~0.210″ (3/16″) = High, ~0.150″ (1/8″) = Low. ArmaLite (AR-10A/B) and Rock River LAR-8 are their own ecosystems — check the receiver markings and magazine type.