The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is d
Seekins Precision Enhanced Builder's KIt
Seekins Precision Enhanced Builder's KIt
Enhanced Builder's Kit
This kit features all of the Seekins Precision manufactured lower receiver parts as well as the pins and springs needed for assembly of your AR15 lower receiver.
Enhanced Bolt Catch
Bolt Catch Roll Pin
Bolt Catch Spring
Bolt Catch Plunger
Buffer Retainer Pin
Buffer Retainer Spring
Mag Release Button
Mag Catch Spring
Safety Selector Barrel 60/90 Degree
Short Safety Selector Lever
Long Safety Selector Lever
Trigger Guard Roll Pin
Seekins Precision Takedown Pins (2) pivot and rear *Only available in builders kit
Takedown Pin Detent (2)
Takedown Pin Spring (2)
Set Screw Hex
SHCS Hex (2)
All items in the shop (excluding patches) are made to order, meaning we do not keep a large inventory of items but make each individual item as it is ordered.
Shipping times are as follows:
Dust Covers: 3 Business Days*
AR-15 PMAGs: 3 Business Days*
AK PMAGs: 5 Business Days*
AR-10 PMAGs: 5 Business Days*
STICKERS: 2 Business Days*
Glock Backplates: 3 Business Days*
Design Your Own items carry an additional 2-4 Business Days for mockup and photoshop work.
Need Rush Handling on a Order? Contact us for rush processing
*Monday - Friday (Excluding Holidays)
SHIPPING SPEEDS AT CHECKOUT
The following is shipping speeds available through USPS: (Note this does not affect the handling speeds of the item)
Priority Express: 1-2 Business Days**
Priority: 2-3 Business Days**
First Class: 3-5 Business Days**
Free Shipping: 2-5 Business Days** (Shipping speed depends on the weight of the items in the shipment)
** Monday - Saturday (Excluding Holidays)
We charge a 10% restocking fee for all cancelled orders.
Magazine Shipment Policy
My Southern Tactical will not ship/sell items where prohibited by law. It is the responsibility of the consumer to ensure compliance with all state and local laws.
State Magazine Restrictions:
- California - 10 rounds
- Colorado - 15 rounds
- Connecticut - 10 rounds
- Delaware - 17 rounds
- Hawaii - 10 rounds
- Illinois - 10 rounds
- Maryland - 10 rounds
- Massachusetts - 10 rounds
- New Jersey - 10 rounds
- New York - 10 rounds
- Rhode Island - 10 rounds
- Vermont - 10 rounds
- Washington - 10 round magazines and no parts, i.e. dust covers
Important Export Restrictions:
Magazines and parts found on this site can only be shipped within the United States. Products are subject to International Traffic in Arms Regulations (ITAR) and cannot be exported out of the United States. It is the responsibility of the individual on the “Ship to” address to follow all federal export regulations.
For further information regarding the applicable laws, regulations, and policies please consult with your export control administrator or contact:U.S. Department of State - www.pmddtc.state.gov/ddtc_public
U.S. Department of Commerce - www.bis.doc.gov
U.S. Department of the Treasury - www.treasury.gov
Is this item in stock?
Everything on the site is made to order, meaning it is produced when you place your order. If marked in stock, then the base item for this in stock and will be customized to meet the requirements of your order within the handling time.
Will this fit my gun?
Depends on what gun you have! We cannot guarantee fitment of our products due to the wide range of variance in the firearm industry, and encourage you to do your own research. This being said, all of our base products are either mil-spec or Magpul base products. These products are made to fit mil-spec rifles.
If I pay for faster shipping will this speed up my order?
No. Selecting a faster shipping speed at checkout will only quicken the time in which it takes USPS to deliver your package, not the production time (handling time) needed to produce your item. Please see our Shipping and Handling page for current production times.
What are 10-round and 15-round options for PMAGS?
These options are for individuals residing in restricted states who need to meet magazine capacity restrictions. Note all of our magazines are full length magazines. If 10-round is selected, you will receive a full body magazine as shown on the listing, that is internally restricted to only allow 10 rounds to be loaded.
What is the difference between Gen 3 and Gen 2 AK PMAGs?
Magpul noticed certain areas of the Gen 2 AK PMAGs were prone to failure, so they reinforced them. Gen 3 AK PMAGs carry a steel skeleton and steel locking lug. However, we have never had issues from our Gen 2 mags and find them better for solving fitment issues on various AKs.
If I select inside only or outside only Dust Cover what will the opposing side be?
If inside only or outside only selection is made on a dust cover listing, then the opposing side will be left in the factory condition. For steel dust covers it is black anodized steel, and is black polymer for Magpul dust covers.
How are these items produced? Laser? Cerakote? Magic?
Items are produced using a hardened UV color ink. Image is professionally printed onto the item for a durable finish for years to come. Any image is possible; however, we are unable to print metallic inks.
Are there limitations to what images we can use on design your own magazines?
No Hate Speech and No Sexually Explicit Content. Click Here to view our entire Content Standards Page!
Do you ship rebuild kits? Ship to law enforcement exemptions?
We only ship magazines that meet the customer’s state capacity restrictions direct to the customer. If you believe you're part of an exemption to the state law, we can ship the item to your local FFL for distribution to you.
Customers Also Viewed
B-Stock Custom Magpul enhanced polymer quick install ejection port dust cover for use in AR-15 rifles and pistols.. Design has been professionally applied to the cover for a vivid and durable finish...
The Sharps Bros lower parts kits contain all high quality, 100% USA produced components, manufactured to our exacting standards. Each kit is guaranteed to fit your mil-spec dimension lower receiver...
Product is a Magpul PMAG 30 AR GEN M3, 30-round polymer magazine in 300 BLK/7.62 caliber OR .223 Remington/ 5.56x45mm caliber. We will select a random magazine from our collection of B-stock...
Design Your Own Custom PMAGPress the "Choose File" button to upload your own image or logo to be used on the magazine. Limit one image per custom PMAG. Image will be properly aligned and placed on...
The MOE SL Stock ��� Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes.Designed for the modern battlefield, the...
Press the "Choose File" button to upload your own image or logo to be used on the dust cover.A MOCKUP WILL BE SENT TO THE EMAIL PROVIDED FOR APPROVAL PRIOR TO ORDER FULFILLMENT. Additional changes...